Pool Skimmer Leak: Signs, Causes and Repair
Water level stopping just below the skimmer is the classic sign. Why skimmers leak, how the leak is confirmed, and how it's repaired.
If your pool is losing water and the level keeps settling just below the skimmer opening, the skimmer itself is a prime suspect. It is the single most common leak point we find on South African pools, old and new.
Why Skimmers Leak
A skimmer is a separate box set into the pool wall at water level, joined to the pool shell and to the suction pipe that runs to the pump. That makes it a meeting point for different materials and joints:
- The joint between the skimmer box and the shell. The box and the pool move slightly differently with temperature, ground movement and the weight of water, and the seal between them eventually opens.
- Cracks in the skimmer box, especially older plastic boxes made brittle by sun and chemicals.
- The suction pipe connection at the bottom of the box.
- Damage from resurfacing or retiling, where the seal around the mouth of the skimmer is disturbed.
- Ground settlement around the pool coping, which can pull the box away from the shell.
Signs of a Skimmer Leak
- The water level drops to the bottom of the skimmer opening and stops there. This is the classic sign: once the water is below the leak, it stops escaping.
- Damp or soft ground, or sunken paving, behind the skimmer
- Visible cracks in the skimmer box or around its mouth
- Loss that happens whether the pump is on or off
To check, top the pool up to mid-skimmer, switch off any auto-fill, and watch where the level settles over a few days. Compare with the bucket test to rule out evaporation. Our guide on evaporation versus a leak explains how.
How a Skimmer Leak Is Confirmed
A professional inspection confirms it with a dye test. With the pump off and the water still, a small amount of dye is released close to the joints around the skimmer. If there's a leak, the dye is drawn visibly towards the gap. The suction line from the skimmer is also pressure-tested to make sure the pipe below isn't leaking too.
This matters because a pool can have more than one leak, and fixing the skimmer while a pipe is still leaking leaves you paying twice. Our pool leak detection inspection tests the shell, fittings and every line.
How It's Repaired
The repair depends on what failed:
- A failed seal between the box and the shell is cut out, cleaned and resealed with a suitable underwater-rated compound.
- A cracked skimmer box may be repaired, or the box replaced, which means opening the coping and paving around it.
- A leaking suction connection is repaired from behind the skimmer, after the paving is lifted.
- Movement-related cracks may need the surrounding coping and bond beam addressed so the leak doesn't come back.
Small seal repairs are often done without draining the pool. Box replacement usually needs the level lowered below the skimmer. See our pool repair service for repairs.
Frequently Asked Questions
Q: Can I fix a skimmer leak myself with putty? A: Underwater epoxy putty can slow a small leak at the skimmer mouth, but it rarely lasts if the box has moved or cracked, and it hides the problem rather than fixing it. Have it confirmed first.
Q: Why does my pool only lose water when it's full? A: Because the leak is at or near the top of the water, often the skimmer or the tile line. Once the level drops below the leak, the loss stops.
Q: Will resurfacing the pool fix a skimmer leak? A: Not on its own. Resurfacing can even disturb the skimmer seal. The skimmer needs to be repaired as part of the job.
Q: How much does finding a skimmer leak cost? A: Pool leak detection is R1,950 including one pump, with no call-out fee in Pretoria or Centurion and R400 elsewhere. The repair is quoted once the leak is confirmed.
